
In this training module, the TPM concept – Total Productive Maintenance – is thoroughly discussed. The goals and benefits of using TPM and the foundations of TPM are presented. The last part of the training is devoted to indicators describing the efficiency of using machines and the effectiveness of a maintenance department.
The course also includes the System of TPM Rounds and Machine Day in industrial companies.
Duration of training: 2 hours 28 minutes for learning + 20 minutes for solving tests
Lessons
This session is dedicated to the introduction to the concept of TPM - Total Productive Maintenance. You will learn about the creation of the method. You will also learn about the 6 big losses, which may be reduced by TPM.
This session is devoted to discussing one of the elements of TPM, which is called Autonomous Maintenance. You will learn about the implementation of Autonomous Maintenance and you will get to know the benefits that can be achieved by using this tool.
In this session you will be introduced to the maintenance strategy of the machinery, which is Preventive Maintenance. After watching this session you will know what Preventive Maintenance is, and what are its particular elements. You will also learn about computer systems supporting the maintenance services.
Firstly you will learn about reliability-based analysis. Then you will find out about the objectives and benefits resulting from conducting RCM analyses. At the end of this lesson the Trainer will discuss an implementation of a reliability-oriented approach.
In this session you will learn about the calculation of the TPM metrics. You will also learn about purposes of using TPM metrics, metrics used in TPM and expected benefits upon implementation of the monitoring system for TPM metrics.
This episode is about deep cleaning the machine. This is the first step to implementing autonomous machine maintenance. After watching this lesson, you will learn what to clean, what to inspect, what to pay special attention to, and finally who should perform these activities.
In this lesson you will learn about the topic of TPM rounds, which is a set of control rounds during which certain people verify the technical condition of machines and devices. After watching this lesson you will be aware why inspection rounds are so important and what changes must take place in the organization in order for them to be effectively introduced.
Recommendations

Andrzej D.
In-depth knowledge of TPM well presented.

Tomasz B.
Naprawdę wartościowe treści. Obchody TPM - polecam ten odcinek każdemu kto pracuje z UR na co dzień.

Daniel Å.

Aleksandra K.

Jakub K.

Justyna G.

Jarosław K.

Artur G.

Dragan M.

Nikola M.

Milos S.

Paweł C.

Bartłomiej T.
Idealny kurs dla wszystkich którzy chcieliby zapoznać się z TPM!

Jarosław K.

Gracjan P.

Mateusz M.

Bartosz J.

Bartosz J.

Jakub P.

Bartosz S.
Contact
Company
Products
Contact
- Do you have a question?
- LUQAM Sp. z o.o. Sp.k.
- Kamieńskiego 47, 30-644 Cracow, PL
- 85 Great Portland, London W1W 7LT, UK
- KRS No. 0000442347
- NIP No. 6793087067
- REGON No. 122736324