Lean Sigma Yellow Belt

The course is an introduction to the concept of Lean Management - the Japanese management philosophy. During the course you will learn about the Toyota Production System - its pillars, foundations and people. Find out how to reduce costs in your company. Learn about optimization techniques and tools that will help to reduce waste. This course includes: 30 min of learning + 20 min for solving tests

This module presents the most popular concept of workplace organisation in the world. The 5S method is a pillar of the Lean Management concept. Taking the 5S Method course you will learn about not 5, but 6 steps of the 5S system! You will get practical examples of how to use the method, and how to control the 5S system. Additionally, you will learn about good practices developed by 5S area experts. This course includes: 2 hrs 10 min of learning + 20 min for solving tests

This training module presents the main goals and methods of mapping processes. Methods such as flow analysis and VSM (Value Stream Mapping) are discussed in detail along with specific examples to help you understand the idea of ​​using the mentioned tools and to see their effectiveness. This course includes: 1 hrs 35 min of learning + 20 min for solving tests

This course focuses on the method of preventing unintentional mistakes by employees. The method is known as Poka Yoke. You will find out what is the purpose of its implementation, the fuctions & key elements of the Poka Yoke method and much more! In the Mistake Proofing course, you will also learn how to use the Poka Yoke method in an office environment. You will learn about the possibilities of visualizing office processes and how to prevent mistakes in these processes. This course includes: 31 min for learning + 20 min for solving tests

In this course you will learn why Kaizen philosophy should be applied to a company’s strategy. You will get to know the concept of Continuous Improvement, and find out what roles and responsibilities individual employees have in the improvement process. Moreover, you will learn about the tasks of employees responsible for the improvement system in a company, as well as the ways to measure the effectiveness of these tasks. This course includes: 36 min of learning + 20 min for solving tests

This course discusses the SMED method – Single Minute Exchange of Die, regarding the reduction of changeover time. In this module you will learn about the four basic stages of SMED. Thanks to this method you can directly influence production flexibility. The Trainer will also discuss SMEDs impact on the OEE indicator. You will be surprised what effects SMED can bring! This course includes: 59 min of learning + 20 min for solving tests

This training module discusses Key Performance Indicators - KPIs. You will learn what KPIs are, as well as how to determine, monitor and manage them. You will also learn about the Wildly Important Goal tool, which is very useful in managing indicators. Moreover you will get to know KOSU, which indicates what the actual labour productivity of a given workstation, manufacturing cell or production line is. As management expert Peter Drucker says: "You can’t manage what you can’t measure."  This course includes: 28 min of learning + 20 min for solving tests

In this course, we answer the question of what working time standardization is about, while you learn about the methods of standardization. You will also find out how to measure working time. After watching this course you will be acquainted with two standardization methods - summary & analytical ones. You will also learn how to create standards using methods of measuring working time. This course includes: 43 min of learning + 20 min for solving tests

In this course you will learn how to properly optimize processes. You will also discover the tools to eliminate waste.  Get to know the Hoshin methodology, which brings amazing effects in a very short time! In addition you will learn about organising production processes based on One Piece Flow. You will find out what are the conditions and benefits resulting from changing the traditional process organisation approach into One Piece Flow.  This course includes: 43 min of learning + 20 min for solving tests

In this course we are discussing the production process control method known as Kanban. You will learn what this method is and where it is used, the requirements and conditions for effective use of Kanban. You will also learn what supermarkets, signals and Kanban cards are. Kanban is usually part of the Just in Time concept, which refers to the delivery of materials, components & packaging directly to the customer - you will also learn about that! This course includes: 26 min of learning + 20 min for solving tests

This course highlights the importance of people in the development and improvement of any organization. You will learn about the Kaizen philosophy, its assumptions and principles.  You will also learn what the system of employee ideas is, and what a system of rewarding employees should look like. You will then gain practical knowledge concerning competence and skills matrices. The next part of the course will be devoted to the system of employee training. You will find out what kind of training your employees need, and what training you should provide to build a competitive advantage on the market. In this course you will also get to know a tool - Employee Performance Evaluation, which is used to motivate, increase the involvement and develop the competences of employees. This course includes: 1 hrs 21 min of learning + 20 min for solving tests

The "DMAIC Model" course is devoted to a detailed discussion of the DMAIC model and its individual phases of define, measure, analyse, improve and control. The course starts off with answering the questions of how to define a process, what is Six Sigma, & an introduction to the DMAIC model. Theory is just one thing, but how does it look in practice? Don"t worry! In the DMAIC Model course you will also find practical tips on how to run a project, from definition to project closure. Additionally, 2 episodes from this course are real case studies! One of them is a case study from the service industry, and the second one is a practical project example from the production industry. This course includes: 2 hrs 11 min of learning + 20 min for solving tests

In this course you will become familiar with Lean Culture in the production environment. You will learn what a Gemba Walk is, why to conduct one, and how to do it correctly. Moreover, you will learn how production meetings should look like, who participates in them and what you actually need to organize them. You will also discover the tools for sharing knowledge such as One Point Lesson, Lesson Learned Card, and Kaizen Card. In the last part of the course you will learn about the importance of communication zones and visual management for proper interpersonal communication. Duration of training: 1 hours for learning + 20 minutes for solving tests

In this training module, the TPM concept – Total Productive Maintenance – is thoroughly discussed. The goals and benefits of using TPM and the foundations of TPM are presented. The last part of the training is devoted to indicators describing the efficiency of using machines and the effectiveness of a maintenance department. The course also includes the System of TPM Rounds and Machine Day in industrial companies. Duration of training: 2 hours 28 minutes for learning + 20 minutes for solving tests

The module is devoted to broadly understood standardization. In the course you will find out what benefits standardization brings to an organization and the consequences of a lack of commonly applicable standards. In addition, you will learn how to implement standardized work, what elements it consists of, and how to verify the current standards. Duration of training: 21 minutes for learning + 20 minutes for solving tests

This course is dedicated to advanced problem solving tools.The first part of the course is about Quick Response Quality Control (QRQC) - the system to respond effectively to problems. In this section you will learn 6 rules of the QRQC and structure of the QRQC system. The second part of the course is devoted to the 8D method. This method allows you to solve problems in an orderly and logical way by using eight steps in the appropriate sequence. You will also get to know the A3 method, which is used for the continuous process improvement and employees development. Duration of training: 1 hours 35 minutes for learning + 20 minutes for solving tests

This module presents the basics of Six Sigma. During the course you will learn about Six Sigma terminology: Project Charter, CTQ, Types of Data, Gage R&R, Histograms, Criteria-Based Matrix, DOE, Pilot Project, Control Plan. You will also learn about the people that are needed in the project team and competences and knowledge of the project team members. The trainer will also discuss the following topics in detail: sampling, constructing statistical hypotheses, faulty statistical inference, dealing with troublesome data using data transformation and statistical testing. Duration of training: 1 hours 34 minutes for learning + 20 minutes for solving tests